Terms of Use
Terms of Use
Draft version of 16 November 2026.
This is a draft. Company details are still to be added, and the text has not yet been reviewed by a lawyer. It is not yet in force.
The short version
- Everything is at your own risk. Bimlogic talks directly to the control units of your vehicle. You decide what you do with it and you carry the consequences.
- Vehicle changes are for off-road use only. Functions that change how the vehicle behaves are intended exclusively for use off public roads.
- Not a BMW product. Bimlogic is independent and is not made, endorsed or approved by BMW AG.
- No promise that it works on your car. Most functions have only been tested against a simulated car.
- Real maintenance only. Never record a service that was not carried out.
1. Who we are and when these terms apply
Bimlogic (the "app") is offered by [company name], registered with the Dutch Chamber of Commerce under number [KvK number], [address] ("we", "us"). You can reach us at info@bimlogic.nl.
These terms apply to every use of the app. By installing or using the app you agree to them. If you do not agree, do not use the app.
The app is meant for enthusiasts working on their own vehicle and for workshops. If you use the app for a business, such as a workshop, you use it as a professional and not as a consumer.
2. Independent product
Bimlogic is an independent product. It is not made, endorsed, approved or supported by BMW AG or any company of the BMW Group, and it is not connected to them in any way. BMW, MINI, iDrive and model names are trademarks of their respective owners and are used only to describe which vehicles the app is meant for.
3. What the app does to your vehicle
Some functions only read information. Others write to the vehicle or operate its components. The table shows which is which and what has been tested on a real car at the date of this draft.
| Function | Effect on the vehicle | Tested on a real car |
|---|---|---|
| Find and connect to the vehicle | Reads only | Yes |
| Vehicle check with verdict, factory options, mileage comparison and PDF reports | Reads only | No, simulated car only |
| Read fault codes, details and PDF report | Reads only | Yes |
| Live data, dashboard and logs | Reads only | No; refused by one car, see below |
| Injector values and cylinder balance | Reads only | No, simulated car only |
| Battery and charging values | Reads only | No, simulated car only |
| Diesel values (oil level, particulate filter) | Reads only | No, simulated car only |
| Service reminders and calendar file | None; uses what the vehicle check read | No, simulated car only |
| Usage history (engine hours, gearbox counters) | Reads only | No, simulated car only |
| Coding backup of DSC, steering and differential | Reads only | No, simulated car only |
| Write service history to iDrive | Writes; an entry cannot be edited or removed one by one | Yes |
| History order | Writes; erases the service history and writes it back | No, simulated car only |
| Clear fault codes | Writes; erases the fault memory | No, simulated car only |
| Reset service intervals | Writes | No, simulated car only |
| Register a battery | Writes | No, simulated car only |
| Tyre pressure reset | Writes; the tyre pressure monitor takes the current pressures as its new reference | No, simulated car only |
| Clear engine and gearbox adaptations | Writes; changes how the vehicle behaves | No, simulated car only |
| Exhaust flap control | Operates a component; changes how the vehicle behaves | Yes, on one engine type (S55) |
| Injector coding | Writes; changes how the engine is fuelled | No, simulated car only |
| Coding write check (DSC, steering, differential) | Writes; reads one block of coding data and writes the same data back, to see whether the control unit accepts coding | No, simulated car only |
| GTS settings (DSC, steering, differential) | Writes coding data; changes how the vehicle drives | No, simulated car only |
| Differential lock test | Operates a component | No, simulated car only |
| Brake bleeding with the ABS pump | Operates the brake hydraulics | No, simulated car only |
| Component tests (fan, thermostat, tank venting, radiator air flaps and others) | Operates components | No, simulated car only |
| Window and sunroof initialisation | Operates; moves the windows or the sunroof | No, simulated car only |
| Headlight levelling reference run | Operates the headlight motors | No, simulated car only |
| Parking brake service position | Operates the parking brake actuators | No, simulated car only |
"Tested on a real car" means tested on one vehicle: a BMW M4 (F82). Connecting has also worked on a 2017 5 Series (G30), where live data was refused by the engine control unit; a fallback for that has not been confirmed on a car. Acceleration times and usage counters are read or calculated from the vehicle's own data and are indications, not official figures. The verdict in the vehicle check and the service reminders rest on what the control units report; they do not replace an inspection of the vehicle. Descriptions of factory options are machine-translated. The app offers many functions only after the vehicle has answered a read request that shows it supports them; that is a check on availability, not a guarantee that the function works correctly. The vehicle check compares mileage readings and can point to a difference, but it is an indication and not proof of the true mileage. The current overview is on our website and may change as testing continues.
4. No guarantee of compatibility
Vehicles differ by model, model year, equipment, control unit and software version. We do not guarantee that any function works, or works correctly, on your vehicle, even if it worked on a similar one. A function that has not been tested on your type of vehicle may fail, do nothing, or have an effect that we did not foresee.
Fault descriptions in the app are machine-translated. Hints shown with a fault are general pointers. They are not repair instructions from the manufacturer and they do not replace a diagnosis by a qualified technician.
5. Use entirely at your own risk
You use the app entirely at your own risk and on your own responsibility. Communicating with, writing to and operating a vehicle's control units always carries risk. This includes, among other things:
- control units that stop responding, lose settings or need to be reprogrammed or replaced;
- warning lights, fault entries, reduced performance or a vehicle that does not start or drive;
- damage to the engine, gearbox, exhaust, brakes, battery, electronics or other parts;
- driving behaviour that differs from what the vehicle was approved with, for example in stability control, steering or the differential;
- loss of the manufacturer's warranty or goodwill, or refusal of work by a dealer;
- the vehicle no longer meeting its type approval or the conditions of your insurance.
You decide whether to use a function, and you are responsible for the result. If you are not sure what a function does or whether it is suitable for your vehicle, do not use it.
6. Changes to the vehicle: off public roads only
Functions that change how the vehicle behaves, or that operate its components, are intended exclusively for use off public roads, for example on a closed circuit or private grounds. This applies in particular to exhaust flap control, GTS settings, the coding write check and other coding, injector coding, the differential lock test, clearing adaptations and component tests, and to any function we add later that alters the vehicle's behaviour, sound or emissions.
A vehicle that has been changed with the app may no longer comply with the rules for use on public roads, including rules on type approval, noise, emissions, periodic inspection and insurance. You alone are responsible for checking and following the law that applies where you are, and for returning the vehicle to a road-legal state before you drive it on public roads. We accept no responsibility for fines, penalties, failed inspections, refused insurance claims or other consequences of using a changed vehicle on public roads.
7. What you must do
- Use the app only on a vehicle you own, or with the clear permission of its owner.
- Never use the app while driving. Use it only when the vehicle is stationary and safely parked, unless a function is plainly meant for logging while someone else drives off public roads.
- Keep the vehicle's power supply stable. Connect a suitable battery charger for longer sessions and for any function that writes to the vehicle.
- Use a suitable ENET cable or wifi adapter that works properly, and do not interrupt the connection while the app is writing.
- Read what the app tells you before you confirm an action, and stop if something looks wrong.
- Follow the manufacturer's safety instructions when working on the vehicle.
- After any work on the brakes, including brake bleeding with the app, check the brake system yourself before the vehicle is driven. The app does not check whether the brakes work.
- Set the tyre pressures correctly before you use the tyre pressure reset. The reset makes the current pressures the reference for later warnings.
- Keep people, hands and objects clear of the windows and the sunroof while they are initialised. Do not rely on the anti-trap protection during that run.
- Secure the vehicle against rolling before you put the parking brake in its service position, and make sure the parking brake holds again before the vehicle is used.
- Keep the coding backup the app makes before it writes coding data, so the original state can be restored.
- Do not copy, resell, reverse engineer or tamper with the app, except where the law gives you that right.
8. Service history: real maintenance only
You may only record maintenance that was actually carried out, with the correct date and mileage, and under your own workshop code. Never use the code or identity of a dealer or of another workshop.
Recording maintenance that did not take place, or with false details, can mislead a later buyer and may amount to fraud. You are fully responsible for every entry you write, and you agree to compensate us for claims by others that result from a false entry.
9. Workshops
If you use the app on a customer's vehicle, you do so under your own professional responsibility. You make sure you have the customer's permission, you inform the customer about what you do, and you remain responsible to your customer for the work. We are not a party to your agreement with your customer.
10. Subscription, price and refunds
The app is offered as a yearly subscription for €39.95 per year. The price shown in the App Store or on Google Play at the moment you buy is the price that applies, including any taxes shown there.
- You buy the subscription through the Apple App Store or Google Play. The licence is tied to the store account you buy with.
- The subscription renews each year unless you cancel it in your store account before the renewal date.
- Payment, cancellation and refunds are handled by Apple or Google under their terms. Ask them for a refund through your store account.
- We may change the price for future periods. A new price applies from your next renewal, and you can cancel before then.
If you are a consumer, nothing in these terms takes away rights that the law gives you, such as a right of withdrawal where it applies.
As long as you have a valid subscription and follow these terms, we give you a personal, non-exclusive, non-transferable right to use the app on your own devices.
11. No warranty
The app is provided as it is. To the extent the law allows, we give no warranty that the app is free of errors, that it is always available, or that it is suitable for a particular purpose or vehicle. We may change, add or remove functions.
12. Liability
To the extent the law allows:
- we are not liable for damage to a vehicle, its control units or other property, for repair or towing costs, for loss of use, loss of value, loss of profit, fines, or any other direct or indirect damage that results from using the app;
- if we are liable anyway, our total liability is limited to the amount you paid for the app in the twelve months before the damage occurred.
These limits do not apply to damage caused by our intent or gross negligence, to death or personal injury caused by our fault, or to any liability that cannot be excluded or limited by law. If you are a consumer, your mandatory legal rights are not affected.
13. Ending your use
You can stop using the app at any time and cancel your subscription in your store account. We may suspend or end your right to use the app if you seriously break these terms, for example by recording false service history.
14. Changes to these terms
We may update these terms, for example when functions are added. The current version is always on this page, with its date. If a change is important, we tell you in the app. If you keep using the app after a change takes effect, you accept the new terms.
15. Law and disputes
These terms are governed by Dutch law. Disputes are brought before the competent court in the Netherlands. If you are a consumer living in another country, you keep the protection of the mandatory law of the country where you live, and you may also go to the court there.
16. Contact
Questions about these terms: info@bimlogic.nl. See also our Privacy Policy.